My Cart

Close
FREE UK shipping when you spend over £40 | International Shipping | Join our mailer for product updates

Lost Vape

Lost Vape Efusion Duo DNA 200/133

£159.99

The Efusion DUO DNA 133/200 by Lost Vape is the first fully customizable DNA200 device on the market, giving vapers the option to use either dual high amp 18650 batteries (max output of 133W) or a 1300mAh 3S LiPo Battery (max output of 200W).

The body of the Efusion DUO is precisely CNC machined out of 6063-T6 Aluminum, polished, and dipped in an anodized finish to give the mod a glossy fresh look. Both dual 18650 batteries and the 1300mAh 3S LiPo Battery can be charged directly through the mod via Micro USB cord.

This device comes with a pre-installed fitted dual 18650 battery sled that is ready to use with pre-soldered terminal leads & mounting screws. While the DNA200 initially required an 11.1V nominal input, Evolv is pushing out a firmware update that will allow the chip to operate in a reduced-voltage mode, thereby permitting the use of two high amp 18650 batteries in serial configuration. In order to compensate for the drop in peak voltage, the wattage ceiling will be reduced from 200W to 133W while using the dual 18650 battery configuration.

If you prefer the convenience of dual 18650 batteries and 133W is sufficient for your vaping needs, then you can simply enjoy the performance of the Efusion DUO DNA133 straight out of the box. However, if 133W is not enough power or you decide you want to experience the full 200W, you can remove the pre-installed battery sled and install the LiPo Battery. After installing the LiPo Battery correctly, a simple setup in Escribe is required and your Efusion DUO DNA200W should be ready to use.

Efusion DUO DNA 133/200 Features

  • Powered by Evolv DNA200
  • First device to take advantage of the 200/133 watt feature of the DNA200 board
  • Compatible with both dual 18650s and 1300mAh lipo battery packs
  • Includes a dual 18650 battery sled with pre-soldered terminal leads & mounting screws
  • Optional 3S Lipo battery from 1 watt up to a full 200 watts
  • Spring loaded Stainless steel 510 connection with nickel coated brass centre pin
  • Very responsive stainless steel buttons
  • XT30 and JST connector for maximum compatibility and user serviceability
  • Firmware upgradeable
  • 200°F – 600°F temperature limits
  • Sliding battery door with stainless steel ball bearing for easy battery access
  • Compact and pocket friendly
  • Measures 91mm x 56mm x 26mm
  • 1Amp micro-USB on-board balanced charger with charging cable included
  • 6 months manufacturer’s warranty from Lost Vape
  • 1 year DNA200 board warranty directly from Evolv

 

Efusion DUO DNA 133/200 Contents

  • 1 x Efusion DUO mod
  • 1 x 3S Lipo battery included ( 1 watt up to a full 200 watts )
  • 1 x USB extendable charging lead
  • 1 x Instruction manual
  • 1 x Spare mounting screws

 

Disclaimer: Advanced products are for experienced vape enthusiasts with extensive knowledge of how electronic devices work along with access to the appropriate safety tools. Please ensure proper precautions are taken when using these devices as to not cause damage and/or harm to the atomizer, device, or yourself. SuperiorVapour will not be held liable or responsible for any damage caused by misuse or mishandling of these advanced vaping products and devices. Use at your own risk.

Customer Reviews

Based on 2 reviews Write a review

Join our Mailing List

My Cart

Subtotal: £0.00

Your cart is currently empty.